Buying a house is a little like taking up a new hobby – home repairs. There are lots of things you don’t know yet that you’ll learn as you go along. You’re gonna need some specialized equipment to get certain maintenance jobs accomplished with finesse. Whether you hope to become a top level home remodeler or simply want to repair a few spots where the dog scratched the woodwork, it takes the right tools to do the job.
First, it’s important to note that you will need a specific tool for a specific job. Trying to improvise can result in connections that don’t connect quite fully, excessive and unnecessary damage to your home or damage to fasteners that will make them hard to back out later.
Always use the right tool. If you don’t know which tool is the right tool, ask someone at Ace hardware, Home Depot or Lowe’s stores. They’re usually friendly, ready to help and knowledgeable.
Our picks for the basic tools home owners need
You’re not going to get very far in your home ownership without interacting with a screw. That’s why you need screwdrivers. But instead of keeping track of a pile of screwdrivers, choose a really good model with magnetic bits. The longer the bit shaft, the better for the really tough jobs. You can also get kits that contain sockets, as well as hex and torx bits. This will be your favorite screwdriver — and your only screwdriver. Ratcheting screwdrivers can be more trouble than they’re worth, but well-made models do significantly cut down on wrist strain.
2. Tape measure
Look, I know you know exactly how long your shoe is and that you never vary in your strides, but for the sake of appearances, pick up a good tape measure. The wider models with 25 feet of tape are really flexible choices. Guess what? You can also use a tape to level if you didn’t pick up a level. Just choose either the ceiling or floor to level with, then measure from either point to the place where your shelf or picture is going to go. Make a mark, then go to the other side and repeat, making sure your tape isn’t slacking. Set as many points as you need between the two ends, being sure to mark at the same height each time.
Everybody’s seen those pictures on your wall, but they’re afraid to say anything about how badly leveled they are. Is it because you didn’t own a level when you hung them? The level on your phone is all fine and good for an estimate, but things like cases change how well they can work. An old fashioned level will never steer you wrong. Ideally, you’ll want a set, including one that’s about six inches long, another that’s two foot long and a third that’s four feet long if you intend to do any construction work in your home.
4. Utility knife
If you don’t have one of these, it’s high time you got one. Or six. Skip the disposables and go for the heavy metal options, you will not regret it. A good utility knife is perfect for cutting through boxes, carpet and vinyl flooring.
Another combo group. It wouldn’t be fair to break the family up, after all. Plus, these pliers all do different jobs. Check them out:
- Locking pliers. These adjustable pliers also have a clamping feature, making them a multi-purpose wonder. You can clamp, you can hold, you can adjust! If you buy only one pair of pliers, choose a mid-sized pair of locking pliers. They’ll do everything regular pliers can do, plus some things groove joint pliers can.
- Groove joint pliers. This iconic plumbing tool is good for other stuff, too. The grooves allow you to expand the plier opening across a wider range of sizes than your locking pliers, but you have to hold them closed yourself. They are incredibly handy at 3 am when the plumbing’s sprung a leak.
- Needle nose pliers. In a totally different class, needle nose pliers are helpful when you’re trying to wire anything or fish out tiny things when you drop them in weird spaces. Primarily, though, wiring things in your home. Always turn the power off before wiring anything, even a new smart thermostat.
Yes, it’s a broad category, but you really need one of each of these:
- 10 oz. hammer. This tiny hammer, otherwise known as the “tack hammer” is handy beyond imagination. Not only is it great for projects that require finesse (you can’t take a big whack at anything with this baby hammer), it’s also dainty enough to use to pull delicate trim work or tiles off the wall.
- Rubber mallet. It gets the award for best rubbery-headed hammer for its ability to pound things without leaving a dent. If you decide to put down certain kinds of laminate floors, for example, this guy is a must-have.
- Standard claw hammer. Everybody needs a standard hammer. They’re general purpose tools that can put nails in and take nails out. Claw hammers also double as pry bars in a lot of situations.
7. Stud finder
When you need to hang something heavy, you really should hang it on a stud. Although people with really good hearing can use the tap test on sheetrock, it’s always better to be certain that you’re hitting a stud, rather than tapping and hoping.
8. Duct Tape
This is one of those multipurpose tool that can be used to make repairs, temporary and longer term, plus used in many different locations besides sealing the air ducts in your home.
Other tools that are great to have
If you have a little extra cash rattling around, you should seriously consider a battery powered tool set that contains, at minimum, a drill and small circular saw. These two tools can get almost any job done, though you may have to buy different bits or blades. Eighteen volt models are much better at being tools than the lower voltage units, many are designed for professional work, they’re that tough.
Others Have Liked This Search
Text or Call the Martin Group for any real estate comments or questions:
Or if you prefer, email us: